Integra 1222 Digital Metering System

Thanks to the large, clear, programmable backlit display the Integra 1222 Digital Metering System it is easy to set up the device to display your chosen parameters. The screen features graphical display that shows the percentage of full scale power measured. The Integra 1222 Digital Metering System features easy wiring and plug in connectors to simplify the installation process. The DIN 96 panel mounted enclosure includes integral panel mounting clips.

Features of the Integra 1222 Digital Metering System:

  • DIN 96 enclosure
  • High contrast backlit programmable display
  • Voltage IN-OUT connections
  • CT current measurement 5A/1A
  • Plug and socket connections
  • Programmable VT, CT ratios
  • Modbus™ RTU
  • 2 pulsed outputs with led indication
  • PF bar indicator
  • 3P4W, 3P3W, 1P2W system types
  • Individual harmonics to 63rd

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

KNX Interface

Additional communication modules for energy-meter

The KNX interface (1 module wide, DIN rail mount) is intended for connecting the energy meter to KNX bus. KNX bus is widely used for home and building control applications. The interface receives the measurement data from the energy meter by means of the infrared port available on the side of the energy meter itself, and gets the power supply from the bus. Only the bus wiring (twisted pair) must be connected, no additional wiring is required. The interface is suitable for both single-phase () and three-phase energy-meter (DRB-80-3P).

Configuration

The interface is provided with an application program to be imported in ETS3, in order to allow the configuration of the communication. ETS3 is the standard software for KNX systems configuration.

Measurements

All the active and reactive energy, voltage, current, active, reactive, apparent power, power factor, frequency registers available on the measuring instrument can be transmitted over the bus. Transmission modes are available: transmission on request, automatic transmission based on adjustable energy account increment (for instance a message every 10 KWh). Status bytes are available as well, containing information about the status of the energy meter and the load (load type, running Tariff, energy import or export and so on). (Some measurements and status information are available only on selected models).

Voltage limits

Upper and lower voltage limits can be set via ETS3. A warning message will be sent over the bus by the interface, in case the voltage value goes beyond the limits.

Energy reset

Commands can be sent via bus to the interface for resetting the energy accounts (enabled only on selected measuring instruments models).

KNX Interface (DRM-KNX) Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Modbus interface RTU and Ascii DRM-MOD

The product is intended to be placed side by side to an energy meter, equipped with an infra-red port on the side, to collect the measurements data from the instrument and to transmit them via an RS-485 serial line to a remote collection station using Modbus protocol.

The communication module automatically recognizes the instrument connected to its infra-red port and is in the position to transmit all the data provided by the instrument itself.

Configuration

The interface is provided with a software tool for Windows software, for configuring installation parameters (such as Modbus address and baudrate) and general settings.

Plug and play

The interface is enabled to recognize automatically the instrument connected to its infra-red port. This is an advantage in terms of flexibility, because the same interface can be connected, to single-phase or three-phase energy meters.

Measurements

The interface acts as a Modbus slave, so that the transmitted measurements can be collected and displayed using one of the software tools available on the market enabled to act as a Modbus master.

Baudrate

The interface is enabled to operate with a number of baudrates, up to 115200 baud. The pure speed of transmission is limited by the band capacity which is 9600 baud on the IR interface:

1 standard module housing (18mm wide), suitable for DIN-rail mounting 35mm

MODBUS INTERFACE RTU AND ASCII DRM-MOD FEATURES

  • Interface available:
    – type BIG ENDIAN: for energy, power, voltage, current, cos and frequency, etc.

  • Modbus Ascii and Modbus, RTU protocols
  • Suitable for both single-phase and three-phase energy-meter
  • 1 DIN module wide (18mm)

M-Bus Interface DRM-M Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

M-Bus Interface DRM-M

Additional communication modules for energy-meters (DRB-80-3P)

The M-Bus interface (1 module wide, DIN rail mount) is intended for connecting the energy meter to M-Bus. M-Bus is a standard widely used for remote reading of various types of consumption meters and sensors. The interface receives the measurement data from the energy meter by means of the infrared port available on the side of the meter itself, and gets the power supply from the bus, so that only the bus wiring (a two-wire standard telephone cable) must be connected, no additional wiring is required. The interface is suitable for both single-phase and three-phase energy-meter.

Measurements

M-bus interface is for remote reading of all of the energy, power, voltage, current, frequency, power factor registers. Status byte are available as well, containing information about the status of the energy-meter (running tariff nominal, voltage and current range overflow).

Commands

Commands can be sent via M-Bus to the interface for resetting the energy accounts. Commands are enabled only on relevant measuring instruments models.

Cable length M-Bus according to EN13757-2 Annex E

Cable type:

  • Shielded telephone cable 0.5mm2 (0.8mm) (typ. 4×0.8mm)
  • NYM-cable (1.5mm2 standard cable)

M-Bus Interface DRM-M Features

  • Interface for energy, power, voltage, current, cos and frequency, etc.
  • M-Bus according to EN1434
  • Suitable for both single-phase and three-phase energy-meter, network analyser and power-meters
  • 1 DIN module wide (18mm)

M-Bus Interface DRM-M Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

DRB Energy-Meters Three-Phase 80-3P

Digital active energy-meter for imported and exported energy – 2 tariffs – 2 SO.

DRB-80-3P is a digital kWh meter to register active energy, both imported and exported, with 2 So pulsed outputs for remote monitoring of active and reactive energies on both tariffs. This series of Digital energy meters with LCD display measure active energy in three phase systems in residential, utility and industrial applications.

4 standard module housing, suitable for DIN-rail mounting Connection through CT …/5A up to 10.000/5A or direct connection up to 80A

DRB ENERGY-METER THREE-PHASE 80-3P FEATURES

  • For transformer primary current of 5A to 10.000/5A. Input is in 5A increments
  • 9 digits – 4 display for energy values indication
  • Detection of connection errors (phase transposition and phase missing)
  • Accuracy class 1 for active energy according to EN 50470-3 (B)
  • Operating range current (Ist … Imax) for direct connection 80A = 0.015 … 80A for connection by CT …/5A = 0.003 … 5A
  • Energy register for import and export
  • Sealable terminal covers
  • 4 DIN modules wide (72mm)

DRM Energy-Meters Three-Phase 80-3P Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Integra Ri3 Digital metering system

The Integra Ri3 digital metering system (dms) represents the first model of a new generation of instruments designed to complement the current Crompton Instruments Integra series.

The Integra Ri3 dms is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters. Its easy programming, mounting and user-friendly navigation make the Integra Ri3 dms an ideal choice for customers who require reliable energy measurement.

The Integra Ri3 dms is built to high quality standards utilising the latest ‘state-of-the-art’ microprocessor and manufacturing technology. Designed, developed and manufactured in the UK, the Integra Ri3 dms builds on Crompton Instruments’ long established reputation for metering product quality.

The product features a DIN-rail enclosure, backlit LCD display and user programmable CT ratios, all accessible via an intuitive user interface. Integra Ri3 dms measures 17 electrical parameters

INTEGRA Ri3 DIGITAL METERING SYSTEM BENEFITS & FEATURES

  • DIN-rail enclosure DIN 43880
  • Backlit LCD screen
  • Programmable CT ratio
  • True rms measurement
  • User programmable system configuration
  • Pulsed output and Modbus as standard
  • Cost effective
  • Simple navigation
  • Crompton renowned quality
  • UK manufactured

Integra Ri3 Digital metering system Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Miniature Split Core Current Transformers

A range of miniature split core current transformers that offers a cost effective and efficient method by which the current can be measured without the need to break the conductor, each current transformer is supplied with colour coded leads of up to 3 meters for connection to the monitoring device. The MSC range of current transformers offers primary currents between 60-500A with 1 or 5A secondaries with class 1 accuracy performance. (Class 3 for 60-80A range). Fixing Kit pictured below.

MSC3SC_SPLIT

MINIATURE SPLIT CORE CURRENT TRANSFORMERS BENEFITS & FEATURES

  • Cost effective moulded case
  • Ratio’s ranging from 60/1 to 500/5
  • Fast Cable clamp connection
  • Multiple fixing options
  • Safety plug in shorting link
  • Faster installation
  • Compact size profile applications

Miniature Split Core Current Transformers Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Single Phase Moulded Case Current Transformers

The range of Crompton Instruments moulded case current transformers offers wide system current ratings, apertures, busbar and case sizes to suit every application. Manufactured to meet EN60044 the range benefits include ratio rating from 1/5 to 6000/5, accuracy up to Class 0.5, integral terminal cover for safety and multiple mounting options. Crompton Instruments current transformers M53Q, M63N and M93R – respectively – pictured below.

M53QM63NM93R

KEY BENEFITS & FEATURES

  • CT ratios from 1A to 6000A with 5A and 1A secondaries
  • Accuracy up to Class 0.5
  • Integral terminal cover
  • High impact, flame retardant moulded case
  • Busbar, DIN-rail or foot mounting options
  • Wide range of apertures and case sizes
  • Reduction of high currents for ease of metering
  • Long product life

Single Phase Moulded Case Current Transformers Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Three Phase Current Transformer

A range of 3-in-1 current transformers combine three traditional current transformers in one moulded case. 3-in-1 current transformers can be directly installed next to a three-phase moulded case circuit breaker, thus saving installation time where fitting three standard individual current transformers would be required. The M3N1 range of current transformers offers primary currents between 60-630A with 5A secondaries with up to class 0.5 accuracy performance.

3 PHASE CURRENT TRANSFORMER KEY BENEFITS & FEATURES

  • Cost effective three-phase moulded case
  • Ratio’s ranging from 60/5 to 630/5
  • Integrated wire sealable terminal cover
  • Busbar, DIN-rail and metal feet mounting hardware supplied
  • Combined M4 posi/slot screw Benefits
  • Isolated output for safety
  • Faster installation
  • Compact size
  • Ex-stock delivery

3 Phase Current Transformer Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Paladin Advantage Universal Programmable Transducer

The Paladin Advantage, 254-XZZ, is a programmable transducer which provides measurement isolation and conversion of all main electrical parameters into an industry standard DC output signal. The 254-XZZ can be used in single and three-phase balanced or unbalanced three or four-wire electrical systems. The 254-XZZ has an accuracy of CL0.2 and includes RS485 Modbus RTU communications protocol and pulse/alarm output as standard.

The 254-XZZ is an accurate device for the conversion of all main electrical parameters into a Voltage or mA output and provides measurement, isolation and conversion of up to four user defined inputs and outputs.
The device is supplied programmed to the users requirements but can be easily be reprogrammed to suit any application.

Designed, developed and manufactured in the EU, with integrated microprocessor for exceptional waveform handling of distorted waveforms. The 254-XZZ is ideal for low, medium and high voltage applications and
provides a high protection against continuous and short circuit protection as well as galvanically isolated inputs and outputs.

PALADIN ADVANTAGE UNIVERSAL PROGRAMMABLE TRANSDUCER FEATURES & BENEFITS:

  • DIN-rail enclosure
  • Measurement, isolation and conversion of up to 4 parameters
  • RS485 Modbus RTU protocol
  • Alarm/pulsed output
  • Programmable VT/CT ratio
  • True rms measurement
  • User programmable configuration
  • Cost effective
  • CL 0.2 accuracy
  • EU manufactured
  • Modbus communications
  • Fully configurable
  • Paladin Advantage Universal Programmable Transducer Data Sheet

    Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

DRM Energy-Meters Single-Phase 32 -1P

The energy-meters use an LCD display to give a clear reading and are used to measure single-phase systems in residential, utility and industrial applications. Monitoring of the energy-consumption is via two SO pulse outputs. The products can be set up to communicate with Modbus RTU, M-Bus, KNX and SD card datalogger interfaces, and thus can be used to analyse energy-consumption in order to reduce to a minimum the running cost for industrial plants and buildings.

Active energy-meters for single-phase alternating current with a, 7 digits counter. These meters have 1 S0 output generating pulses for remote processing of the active energy measurements for 1 tariff.

DRM ENERGY-METERS SINGLE-PHASE 32-1P FEATURES

  • Display LCD
  • For direct connection 32A and 40A
  • 7 digits for energy and other values indication
  • Accuracy class 1 for active energy and power according to EN 50470-3 (B)
  • Operating range current (Ist … Imax) for direct connection 32A and 40A = 0.020 … 32A or 40A
  • Seal-able terminal covers
  • The standard versions are designed to be combined with the communication module
  • 1 DIN modules wide (18mm)

DRM Energy-Meters Single-Phase 32 -1P Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Q2C Wiring Solution

The Q2C wiring solution reduces wiring time by at least 80%, whilst also ensuring error-free installation. With the Q2C wiring solution, you can quickly and easily connect Integra Ci5 Digital Metering System (DMS) and 3-in-1 current transformers.

Components include:

  • The Integra Ci5 DMS
  • 3-in-1 CTs
  • Wiring looms in various lengths

The Q2C wiring solution provides simple yet fast installation utilising plug-in connections and pre-cut wiring looms, which allow the installer to easily connect the digital meter and the current transformer to the incoming or outgoing supply.

Q2C WIRING SOLUTION KEY BENEFITS & FEATURES

  • A complete wiring solution with integral connectors and earthing
  • Screwless terminal connections, vibration proof and maintenance free
  • Reduces installation time by at least 80% over standard methods
  • Eliminates potential cost of errors in electrical connections or programming
  • UK manufactured product
  • Tidy solution to cable management

Q2C Wiring Solution Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Integra Ci5 Digital Metering System

Digital energy meter for single and three-phase electrical systems

The Integra Ci5 Multifunction Power Meter is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters. Its easy programming, mounting and user-friendly navigation make the Integra C15 Digital Metering System an ideal choice for customers who require reliable energy measurement. Integra Ci5 is built to high quality standards utilising the latest ‘state of the art’ microprocessor and manufacturing technology. Designed, developed and manufactured in the UK. The Intergra Ci5 is part of the Q2C metering system which have plug-able terminals and can be used with the QC3N1 plug in current transformer and the pre-manufactured wiring looms. If you wish to use a different current transformer, then this is possible as can be supplied with a terminal kit, allowing you to manufacture your own looms.

Integra Ci5 DIGITAL METERING SYSTEM SPECIFICATIONS:

  • 96×96 Panel Mounted
  • Three Phase Networks
  • Back-lit LCD Display
  • User Programmable CT ratio
  • True RMS measurement
  • User Programmable system Configuration
  • THD up to the 31st harmonic
  • Parameters: Current, Neutral Current,Max Demand Current,Voltage, Frequency, Power, Power Demand, Power Factor, kWh, kVArh
  • Built in Pulsed Output
  • Built in RS485 Output (Modbus)

Integra Ci5 DIGITAL METERING SYSTEM FEATURES:

  • Voltage In and Out connection
  • Pulsed and RS485 Modbus RTU fitted as standard
  • Programmable CT ratio
  • True rms/THD measurement
  • Self powered, no need for additional auxiliary supply for screen display operation
  • User programmable, single-phase or three-phase four-wire system configuration
  • Easy ‘clip-in’ panel mounting
  • New blue on black back-lit
  • LCD screen

Integra Ci5 Digital Metering System Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Integra Ci3 Digital Metering System

The Integra Ci3 digital metering system is an accurate and cost effective solution for measurement and display of all major electrical and power quality parameters with easy programming, mounting and user friendly navigation.

The product features a DIN 96 panel mounted enclosure, backlit LCD display and user programmable CT ratios, all accessible via an intuitive user interface. Integra Ci3 dms measures 17 electrical parameters including total harmonic distortion (THD) measurement up to the 31st harmonic.

Programmable Functions

Integra Ci3 dms is programmable to suit single-phase, three-phase three-wire and three-phase four-wire system configurations. Programmable CT ratios enable to display any current range.

Display

The parameters can be viewed on a backlit LCD display. The 15 screens are accessible via four buttons on the front panel allowing to scroll between various screens making the navigation very user-friendly, intuitive and above all – simple.

Plug-in Modules

Integra Ci3 dms features two output options ports at the rear of the product. This allows to fit either pulsed relay or communication modules, e.g. Modbus RTU RS485 protocol communication output.

Panel Mounting

Integral retention clips allow fast, safe and secure panel mounting in various
material thicknesses without the need for external screws or clips.

Integra Ci3 BENEFITS & FEATURES

  • Cost effective
  • Intuitive navigation
  • Crompton renowned quality
  • UK manufactured
  • Easy ‘clip-in’ panel mounting
  • DIN 96 enclosure
  • Backlit LCD screen
  • Bezel depth 6.1mm
  • Plug-in output modules
  • Programmable CT ratio
  • True rms measurement
  • User programmable system configuration

Integra Ci3 Digital Metering System Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.