SATEC PAS (Power Analysis Software)

SATEC’s PAS is a complete analysis and engineering software that has been designed specifically to program and monitor all SATEC devices. PAS comes complete with a range of additional tools that facilitate with system setup including a communication debugging module. PAS is bundled with all SATEC instruments at no additional cost.

PAS’s versatility stems from its numerous features:

  • Automatic power quality reports for EN50160 & IEEE 1159
  • Automatic polling of devices
  • Easy off-line instrument setup
  • Direct data access for status monitoring or analysis
  • Broad range of communication platforms: TCP/IP, USB, RS standard serial lines, Telephone/Modem
  • Highly sophisticated analysis:
    Current or historical data logging
    Trend analysis – individual or 3 phases together
    Trend over time data log or waveform
    Trend based on user-selected parameters or limits
    Harmonic spectrum
    Harmonics power direction
    EN50160 comparison tables for HV and LV applications
    G5/4 comparison tables for HV and LV applications
    Vector analysis/phasor diagram
    Automatic power quality and fault categorisation
    Waveform comparison between sites
    ITI (CBEMA) curve
    Automatic filter and sort capabilities
    Uploading TOU settings
    Uploading with variable setpoints
    Alarms with variable setpoints
    Delta measurement
  • Self-test
  • Easy export to spreadsheet, Word, Excel or database
  • Extensive graphic and report capabilities for waveforms, harmonics & billing
  • Export COMTRADE (IEEE standard common format for transient data exchange) – Export PQ
Control Alarm Setpoints Basic Setup Directional Harmonics
Control Alarm Setpoints Basic Setup Directional Harmonics

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

SATEC ExpertPower

SATEC ExpertPower Software Solution delivers complete Power Quality analysis, energy management, billing, demand response and generator control. It can be purchased either as an on-line service (Service Edition) or as a stand-alone package (Pro Edition).

ExpertPower provides the user with information and analytics required to improve the efficiency, reliability, security and profitability of our customers’ energy system.

ExpertPower uses a standard web browser as user interface, for both local installation and Internet remote installation. With ExpertPower Service cuts out the need for server hardware and software or on-site IT experts, while the standalone Pro version aids in reducing monthly charges.

ExpertPower can handle installations of over 10,000 managed devices at one site making it the most powerful energy management solution in the market. Its scalability enables the user to start with small installations and gradually expand as required.

Applications Include Commercial, Data Centers, Industrial, Utilities | Smart Grid | Renewable

SATEC ExpertPower Features Include:

  • Automatic data collection from energy meters, Power Quality analyzers and substation automation controllers
  • Presentation – View all data in your browser—no software installation, no employee training
  • Historical information – All data is logged in the database, monitor trends to identify potential problems
  • Reports – Manual, automatic or scheduled reports
  • Alarms and Events – Multi-level thresholds for complex criteria, Messaging, emails and SMS alarms
  • Connectivity & Interoperability – Integrate all energy management, automation system and billing into one web based system. Built-in data export to different formats (Excel, PDF etc.)
  • Architecture – Grow as you go architecture—from single device to thousands. Distributed servers—support for server virtualization technologies such as VMWare. Local or remote MS-SQL database. Supports express, standard and enterprise MS SQL editions

System Diagram:

ExpertPower System Diagram

SATEC ExpertPower Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

SATEC PM130 PLUS High Performance Powermeter

The PM130 PLUS is a high performance multifunctional 3-phase power meter. This series of power meters provides a very cost-effective substitute for numerous analog meters used by commercial, industrial and utility customers for their basic power metering.

The PM130 PLUS is widely used in panel boards and SCADA systems. With the introduction of the unique TOU module, the EH model caters for all of the requirements of revenue metering applications. It is also appropriate for utility substation automation due to its integrated support of the industry standard DNP 3.0, Modbus RTU and IEC 60870-5-101/104 protocols, as well as its I/O capabilities (using the Digital Input/Output modules).

The PM130 PLUS series consists of two basic models providing digital measurements of more than 80 electrical parameters locally, and more than 100 electrical parameters via RS-485 interface.

The PM130 PLUS has extra bright 7 segment LED display, 3 lines 4-5 digits as well as SATEC’s unique bar graph loading indicator.

All models are suitable for mounting on both 4-inch round and 9292mm square cutouts

Note: The SATEC PM130 PLUS should be ordered with and will only work with dedicated SATEC HACS (High Accuracy Current Sensors) 

SATEC PM130 PLUS Features:

  • Multifunctional 3-phase Power Meter –
    3 voltage inputs and 3 current transformer-isolated AC inputs
    True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
    Ampere/Volt demand meter
    25/50/60/400 Hz measurement capabilities
  • Billing/TOU Energy Meter (PM130E & PM130EH)
  • Harmonic Analyzer (PM130EH)
  • Real-time Waveform Capture
  • Programmable Logical Controller
  • Event and Data Recording (PM130E and PM130EH)
  •  I/O Options
    TOU+4DI module – four digital inputs with 1-ms scan time and battery backup for the real time clock; automatic recording of last five digital input change events with timestamps (see the PM130 PLUS Modbus Reference Guide)
    4DIO – four digital inputs and two relay outputs with 1-cycle update time; unlatched, latched, pulse and KYZ operation; energy pulses, selection of solid state or electromechanical relays
    12DIO – twelve digital inputs, 4 relay outputs and optional Ethernet or RS-485 communication port
    4AO – four optically isolated analog outputs with an internal power supply; Selection of 0-20mA, 4-20mA, 0-1mA, and ±1mA output; 1-cycle update time
  • Communications –
    Standard 2-wire RS-485 communication port
    Protocols: Modbus RTU, ASCII, DNP3.0, Optional IEC 60870-5-101; With Ethernet Modbus/TCP, DNP3/TCP; Optional IEC 60870-5-104 and with GPRS module: Modbus/TCP
    ExpertPowerTM client for communicating with SATEC ExpertPowerTM Internet services (with Ethernet or GPRS modules)
    TCP notification client for communicating with a remote Modbus/TCP server on events or periodically on a time basis (with the Ethernet or GPRS module)
  • Measurement –
    Direct voltage measurement of up to 690v
    Selection of current input connections:
    5A – measurement of up to 10A using conventional 5A CTs
    1A – measurement of up to 2A using conventional 1A CTs
    RS5 – allowing connection remotely of 5A conventional CTs with split core remote sensors
    HACS – selection of remote sensors up to 1200A with built in shorting circuit and class 0.5s system accuracy (meter plus CTs)
  • Software Support –
    PAS™ – SATEC’s bundled software for meter configuration and data acquisition tool, including waveforms, phasors, harmonics and more
    ExpertPowerTM – SATEC’s unique Internet services offer the industry leading energy management software (EMS) without client software installation

SATEC PM130 PLUS High Performance Powermeter Data Sheet

PM130 PLUS Multifunctional 3-Phase Power Meter


Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

SATEC PM135 Multifunctional Powermeter

The SATEC PM135 is a multi-functional 3-phase power meter equipped with capabilities for power quality, basic revenue metering and harmonics analysis.

The PM135 offers a very cost-effective substitute for numerous analog meters used for basic power metering by commercial, industrial and utility customers.

The PM135 is widely used in panel boards and SCADA systems. With the addition of the unique TOU module, the EH model meets the requirements of revenue metering applications and is also apt for utility substation automation with its support of the industry standard DNP 3.0, Modbus RTU and IEC 60870-5-101/104 protocols, as well as its I/O capabilities (using the Digital Input/Output modules).

The PM135 series consists of two basic models which provide digital measurements of more than 80 electrical parameters locally, and more than 100 electrical parameters via RS-485 interface.

Note: The SATEC PM135 should be ordered with and will only work with dedicated SATEC HACS (High Accuracy Current Sensors) 

SATEC PM135 Features:

  • Multi-Functional 3-Phase Power Meter –
    Voltage, power, energy, power factor, current (including neutral current), frequency, voltage/current unbalance
    Current range (up to 200%)
    Frequencies supported: 25, 50, 60 and 400 Hz
    Direct connection up to 690V L-L (up to 1.15 MV via PT)
  • Basic Power Quality Control (EH Model) –
    Individual voltage and current harmonics (up to the 40th)
    Voltage and current THD, TDD & K-Factor
    Time stamped max/min values
    Waveforms 128 samples/cycle (via comm.)
  • Revenue Meter (EH Model) –
    Exceeds accuracy class 0.5S
    Time Of Use (TOU) tariffs
  • Event/Data Log (EH Model) –
    System events & data logging
    Real-time stamps
  • Communication protocols –
    Protocols: Modbus RTU, ASCII, DNP 3.0, Modbus/TCP, DNP3/TCP, Profibus DP, IEC 60870-5-101, IEC 60870-5-104
  • Alarm and Control Functions –
    16 programmable set points
    4 counters
  • Real Time Clock – Built-in clock and calendar functions
  • Power Supply –
    Multi-purpose AC/DC power supply (85-265V AC, 88-290V DC)
    Special versions (12, 24-48V DC)
  • Construction –
    Dual panel mounting: 4” Round; Square 96×96 DIN
    Weight: 1.5 lbs / 0.7 kg
    H×W×D: 4.5×4.5×4.3″ / 114×114×109 mm
    One add-on module

SATEC PM135 Multifunctional Powermeter Data Sheet

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

SATEC PM175 Power Quality Analyzer

The SATEC PM175 is a multi-functional, compact, 3-phase AC power meter and power quality analyzer, (PQ), that has been specially designed to meet the needs of multiple users ranging from substation operators, generator users, industrial consumers, commercial energy consumers and electrical panel builders.

This PM175 caters for an entire range of applications which demand high performance power quality monitoring and root cause analysis such as switch gear monitor, feeder, power quality and utility SCADA and revenue metering and billing. It is also suitable for substation automation due to its support of industrial standard DNP 3.0 and Modbus RTU protocols.

The PM175 provides the full range of PQ monitoring capabilities with built-in EN50160 statistics and reports. It allows both consumers and suppliers to monitor the quality of incoming or outgoing electric power. One of the main advantages is that it permits power suppliers to prepare corrective action in a timely manner and helps consumers to prevent equipment damages caused by power quality issues.

Local and remote data acquisition is enabled via two communication ports.

Note: The SATEC PM175 should be ordered with and will only work with dedicated SATEC HACS (High Accuracy Current Sensors) 

SATEC PM175 Features:

  • Multifunctional 3-Phase Power Meter – Voltage, frequency, current (including neutral current), voltage/current unbalance, power, energy, power factor, load profile
  • Multi-Tariff Revenue Meter – Class 0.2S precision according to IEC 62053-22, Built-in Time of Use (TOU) tariffs, Sealing option, Built-in clock and calendar functions, Time synchronization
  • Advanced Power Quality Analysis – Monitoring, statistics & reports according to EN50160 specifications, Event statistics, Waveform recording with 6 channels, Harmonics & inter-harmonics according to IEC 61000-4-7, Directional power harmonics, Voltage and current THD coefficients, Flicker according to IEC 61000-4-15
  • Event/Data Log – Power quality event/data logging, Logging capability for more than 100 parameters, Logging parameters with real-time stamps
  • Alarm & Control Functions – 16 programmable set points, 2 programmable relay outputs 3A, 250V, 2 digital inputs, 2 optional analog inputs or outputs, TCP Notification Client
  • Communication – 2 independent communication ports, Protocols: Modbus RTU, ASCII, DNP 3.0
  • Isolation – Full galvanic isolation of voltage and current measuring circuits—6 kV Impulse

SATEC PM175 Power Quality Analyzer Data Sheet

PM17X Series – IEEE1159 / EN50160 Advanced Power Quality Analyzer & Revenue Meters

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

SATEC BFM136 Branch Feeder Monitor

SATEC’s BFM136 Branch Feeder Monitor is the ideal solution for Multi-circuit, multi-client metering. It is suitable for both new projects and retrofit projects as it is automated to provide metering, demand and energy readings, logging and multi-tariff (TOU) data.

The BFM136 is capable of monitoring up to 12 three phase circuits, 18 two phase or 36 single phase circuits, or any grouping of single or three phase circuits. The BFM136 monitors up to 36 currents via High Accuracy Current Sensors (HACS). Each HACS monitors and reports the current consumed by each of the branch circuits at the panel board. Single or multiple circuits can be defined for each customer. Such flexibility makes it the ideal solution for multi-tenant facilities such as office buildings, residential projects and shopping malls.

The BFM136 is a compact and light weight instrument that can easily fit into existing panel boards. It can also be flush mounted nearby therefore removing the need for expensive retrofit projects or for allotting extra space for the device.

Note: The SATEC BFM136 should be ordered with and will only work with dedicated SATEC HACS (High Accuracy Current Sensors) 

SATEC BFM136 Branch Feeder Monitor Features:

  • Logging – Multi-point power, energy and demand data logging
  • Data Storage – Real Time Clock (RTC) and Flash memory for data and event logger, the TOU (Time of Use) function stores energy consumption data according to the programmed time schedule, daily energy tariff profile and maximum demands programmable interval for load profile
  • LCD Display – provides up to 36 channels of consumption readings for each tenant
  • Cost Effective
  • High accuracy 0.5S
  • Standard Communication Platforms – Protocols: Modbus RTU, Modbus TCP/IP, Modbus ASCII. Ports: Standard: RS-485 port, Optional: Ethernet TCP/IP, dial-up modem, RS-232, additional RS-485/422 port, wireless RF modem, 2G/3G modem
  • Input – Current inputs: 36 per device. Measured currents, per phase: with unique High Accuracy Current Sensors (HACS) rating from 100A to 3000A. Voltage measurement range: 120 (207) to 277 (480)V AC ± 15% (The accuracy is guaranteed to this voltage range). Auto rangepower supply: 88-552V AC
  • Alarms – Over/under voltage, over current, over kW, over kVA, over/under frequency
  • Three-year warranty

SATEC BFM136 Branch Feeder Monitor Data Sheet

BFM136 Branch Feeder Monitor for Multi-Tenant Submetering

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.