500 x 500 x 2mm earth plate
The use of earth plates as electrodes significantly reduces the resistance of earthing in stony grounds, as it increases the area of contact between the electrode and the ground.
500 x 500 x 2 mm copper earth plate. Includes connector (AT-020F).
Related products
- SKU: AT-016HRead More...
Copperbond earth rods of a high quality which comply with even the most demanding regulations in order to achieve long-lasting earthing.
Electrolytically coated with copper which is 254 µm thick and 99.9% pure, with a proven resistance to corrosion. This type of electrolytic coating prevents cracks or fissures, which may be caused in the outer layer of the earth rods with mechanical coating.
Using the appropriate accessories, threaded copperbond earth rods enable the electrode to extend in order to obtain better earth resistances.
- SKU: AT-070JRead More...
Mesh earthing systems are a more cost-effective option than earth plates and still work well in stony ground, reducing the step or contact voltages that may occur.
To be installed horizontally.
Recommended to avoid step voltages in public buildings with low resistivity soil.
- SKU: AT-031HRead More...
Solid copper rods enable long-lasting earthing in ground with high corrosion levels.
Threaded electrodes with the correct accessories enable the length to be increased, thus achieving a better earth resistance.
- SKU: AT-010LRead More...
CONDUCTIVER PLUS is a ground enhancing gel with low solubility which is, nonetheless, very hygroscopic.
CONDUCTIVER PLUS is characterised by:
Its capacity to create partially ionized electrolytes, with a high charge and capacity to retain water and form gels.
Remaining in the ground for a long time, thanks to the formation of bonds with the particles.
Increasing the conductivity of the ground for one year (considering rainfall of 700 litres/m2 ).
Not causing corrosion of the earth electrod
Being totally ecological.