Bonding bars for earth pits
It enables up to 5 conductors to be connected with compression terminals.
This bar can be attached to the AT-010K earth pit.
Copper 300 x 64 x 53 mm bonding bar, with 5 screws M10.
Related products
- SKU: AT-050KRead More...
Spark gap for earth bonding with brass clamps for ø 8 – 10 mm (50 – 70 mm²) cable and 30 x 2 – 30 x 3.5 mm tape.
- SKU: AT3W_StormRead More...
The ATSTORM® is an expert local early warning system for risk prevention against lightning storms. The ATSTORM® system monitors both the electrostatic field and the electromagnetic field – able to detect both the electrical storms that approach the area to be protected, as well as those that are forming above it.
The ability to monitor all phases of a storm, from cloud electrification through to its dissipation, makes ATSTORM® a complete advanced data system, which alerts to initiate preventive actions that minimize the risks caused by lightning impacts.
- SKU: AT-010LRead More...
CONDUCTIVER PLUS is a ground enhancing gel with low solubility which is, nonetheless, very hygroscopic.
CONDUCTIVER PLUS is characterised by:
Its capacity to create partially ionized electrolytes, with a high charge and capacity to retain water and form gels.
Remaining in the ground for a long time, thanks to the formation of bonds with the particles.
Increasing the conductivity of the ground for one year (considering rainfall of 700 litres/m2 ).
Not causing corrosion of the earth electrod
Being totally ecological.
- SKU: AT-032LRead More...
Aplifill is a highly hygroscopic compound and retains moisture around the conductor when used to fill any excavation made for soil replacement. Available in a Graphite Powder mixture or Clay mixture.
