Earth pits
Withstand 5,000 kg loads.
Designed to facilitate handling and storage.
Good resistance to chemical substances.
Resistant to UV rays.
Attached using two individual screws
250 x 250 x 250 mm polypropylene earth pit.
Related products
- SKU: AT-012HRead More...
A lack of free ions in the surrounding ground is detrimental to the correct performance of the earthing. Earthing systems using dynamic electrodes are based on the contribution of ions to the ground.
The system mainly consists of a copper electrode (APLIROD®) filled with a mixture of ionic compounds. The moisture condenser absorbs environmental moisture and dissipates it in the soil surrounding the electrode, adding free ions and gradually lowering the resistivity of the soil.
- SKU: AT-010LRead More...
CONDUCTIVER PLUS is a ground enhancing gel with low solubility which is, nonetheless, very hygroscopic.
CONDUCTIVER PLUS is characterised by:
Its capacity to create partially ionized electrolytes, with a high charge and capacity to retain water and form gels.
Remaining in the ground for a long time, thanks to the formation of bonds with the particles.
Increasing the conductivity of the ground for one year (considering rainfall of 700 litres/m2 ).
Not causing corrosion of the earth electrod
Being totally ecological.
- SKU:Read More...
The goose foot is a configuration recommended by lightning protection standards UNE 21186 and NF C 17-102 in order to obtain low inductance in the earthing system.
It consists of 30 x 2 mm tin-plated copper tape.
- SKU: AT-006JRead More...
It enables up to 5 conductors to be connected with compression terminals.
This bar can be attached to the AT-010K earth pit.
