Goose foot
The goose foot is a configuration recommended by lightning protection standards UNE 21186 and NF C 17-102 in order to obtain low inductance in the earthing system.
It consists of 30 x 2 mm tin-plated copper tape.
Goose – foot shaped earth termination made with 30 x 2 mm tinned copper tape (4 m + 3 extensions of 7 m each).
Related products
SKU: AT-010LRead More...CONDUCTIVER PLUS is a ground enhancing gel with low solubility which is, nonetheless, very hygroscopic.
CONDUCTIVER PLUS is characterised by:
Its capacity to create partially ionized electrolytes, with a high charge and capacity to retain water and form gels.
Remaining in the ground for a long time, thanks to the formation of bonds with the particles.
Increasing the conductivity of the ground for one year (considering rainfall of 700 litres/m2 ).
Not causing corrosion of the earth electrod
Being totally ecological.
SKU: AT-012HRead More...A lack of free ions in the surrounding ground is detrimental to the correct performance of the earthing. Earthing systems using dynamic electrodes are based on the contribution of ions to the ground.
The system mainly consists of a copper electrode (APLIROD®) filled with a mixture of ionic compounds. The moisture condenser absorbs environmental moisture and dissipates it in the soil surrounding the electrode, adding free ions and gradually lowering the resistivity of the soil.
SKU: AT-031HRead More...Solid copper rods enable long-lasting earthing in ground with high corrosion levels.
Threaded electrodes with the correct accessories enable the length to be increased, thus achieving a better earth resistance.
SKU: AT-050JRead More...The use of earth plates as electrodes significantly reduces the resistance of earthing in stony grounds, as it increases the area of contact between the electrode and the ground.