Solid copper earth rods
Solid copper rods enable long-lasting earthing in ground with high corrosion levels.
Threaded electrodes with the correct accessories enable the length to be increased, thus achieving a better earth resistance.
ø15 x 1200 mm solid copper earth rod with M10 internal thread.
- SKU: AT-016HRead More...
Copperbond earth rods of a high quality which comply with even the most demanding regulations in order to achieve long-lasting earthing.
Electrolytically coated with copper which is 254 µm thick and 99.9% pure, with a proven resistance to corrosion. This type of electrolytic coating prevents cracks or fissures, which may be caused in the outer layer of the earth rods with mechanical coating.
Using the appropriate accessories, threaded copperbond earth rods enable the electrode to extend in order to obtain better earth resistances.
- SKU: AT-012HRead More...
A lack of free ions in the surrounding ground is detrimental to the correct performance of the earthing. Earthing systems using dynamic electrodes are based on the contribution of ions to the ground.
The system mainly consists of a copper electrode (APLIROD®) filled with a mixture of ionic compounds. The moisture condenser absorbs environmental moisture and dissipates it in the soil surrounding the electrode, adding free ions and gradually lowering the resistivity of the soil.
- SKU: AT-010LRead More...
CONDUCTIVER PLUS is a ground enhancing gel with low solubility which is, nonetheless, very hygroscopic.
CONDUCTIVER PLUS is characterised by:
Its capacity to create partially ionized electrolytes, with a high charge and capacity to retain water and form gels.
Remaining in the ground for a long time, thanks to the formation of bonds with the particles.
Increasing the conductivity of the ground for one year (considering rainfall of 700 litres/m2 ).
Not causing corrosion of the earth electrod
Being totally ecological.