Spark Gaps
Spark gap for earth bonding with brass clamps for ø 8 – 10 mm (50 – 70 mm²) cable and 30 x 2 – 30 x 3.5 mm tape.
AT-050K is the most appropriate means of joining the different earth connections when this
connection cannot be made directly as, for example, it may cause corrosion problems.
When a discharge occurs and the voltage increases in the earth connections, the spark gap
will activate, directly joining the earth connections and thus preventing current passing from
one to another through equipment or internal installations.
Related products
SKU: AT-031HRead More...Solid copper rods enable long-lasting earthing in ground with high corrosion levels.
Threaded electrodes with the correct accessories enable the length to be increased, thus achieving a better earth resistance.
SKU:Read More...The goose foot is a configuration recommended by lightning protection standards UNE 21186 and NF C 17-102 in order to obtain low inductance in the earthing system.
It consists of 30 x 2 mm tin-plated copper tape.
SKU: AT-012HRead More...A lack of free ions in the surrounding ground is detrimental to the correct performance of the earthing. Earthing systems using dynamic electrodes are based on the contribution of ions to the ground.
The system mainly consists of a copper electrode (APLIROD®) filled with a mixture of ionic compounds. The moisture condenser absorbs environmental moisture and dissipates it in the soil surrounding the electrode, adding free ions and gradually lowering the resistivity of the soil.
SKU: AT3w-RodsRead More...Lightning protection using franklin rods and meshed conductors is used to share and dissipate the lightning current through a network of down-conductors and earth terminations.